天天操夜夜操_天天射影院

核心工艺性能指标：Main Technical Parameters

机型 Model	CLFQ-L1200
质料宽度 MAX.Width of raw material	1150mm
放卷直径 Max.parent Web Diameter	Φ700mm
收卷直径 Max.Rewinding Diameter	Φ500mm
机器速率 Max.Machine Speed	400m/min
资料厚度 Edge adjusting accuracy	0.012-0.2mm
纠偏精度 Total Power	±0.3mm
总功率 Total Power	14KW
分量 Machine Weight	3800kg
形状尺寸 Overall Dimensions	2520×1600×1650mm
分切宽度 Min.Slitting Width	30mm

表明及特性:1、该型模切机靠谱于模切PE、PP、PET,PVC等pp塑料膜，结合膜， 膜，印刷膜。是保护膜、薄片四次加工处理和印刷内包装单位的实现机种。2、产品由PLC汇总放肆（三矢量素材机械设备）并去接纳手触屏人机对战对话框对产品停下汇总支配。3、放卷接受启动时踩刹车鼓式制动器器，由PLC被动在乎卷径做完被动涨力合理。4、带领放肆由每台矢量素材定频电气自动化驱动包，顺利完成恒线数率放肆，并有xiao地相隔绝多远收放卷力值之中的双方引响。5、收护符去接纳气涨轴收卷由二台失量变频式电气自动化自力驱动器，收卷弹力规范，安装收卷孔径，分切机料厚，添加弹力等参数指标，由PLC运算结束主動弹力依次增加。（必选滑差气涨轴）6、收法杖辊轴聚散宽容自动装配图，经济压力必有妖途经工作调压阀放肆，（辊轴宽容平推式）。7、放卷卸车搬运料进行气涨轴卸车搬运料，油路分配器伸缩，料卷油路分配器起伏，卸车搬运料快速、打球高。8、放卷EPC纠编裝配穿搭CCD影象感测器器，可精确度吃妻上瘾一端导致精度。9、模切采纳直刀模切装配工艺线，外圆干干净净，有边固体废物风送。（纸页需进货圆刀模切装配工艺线）10、所需要的零部件由云同步软件带、云同步软件轮为传动装置体例，履行与拧紧宽容液压体例11、牵引机导辊：静匀衡铝锰钢导辊，看起来溶化应对 12、标准应具初始化缓解、停车防松、计米定长，定速、卷径运算对半分切攻效。13、体系中具有圆满的机、电、气三合一化想法，并得到全部的卫生防护技巧。

Description and characteristics:

1. This type of slitting machine is suitable for slitting PE, PP, PET, PVC and other plastic films, composite films,

ꦿFilm, color film. It is the ideal model for film and sheet secondary🌃 processing and color printing packaging enterprises.

2. The who🤪le machine is controlled by PLC (three vector motor) and uses the touch screen man-machine interface to carr✱y out centralized operation of the whole machine.

3. 🐭The unwinding adopts the start brake brake, and the automatiꦕc calculation of the coil diameter is realized by the PLC.

4. The 🧸traction control is driven by a vector variable frequency motor to achieve constant line speed control and effectively interrupt the interaction between the tension of the rewinding and unwinding.

5. The reel is wound by the ai💮r-up shaft and driven by two vector inverter motors. The winding tension control is based on the winding diameter, the thickness of the slit, the tension and other parameters. The automatic tension is incremented by the PLC operation.（Optional Differential Air Shaftrs）6. The take-up reel is clutched with a pneumatic device, and the pressure is controlled by a pressure regulating valve. (The pressure roller is of flat push type).

7. The unwinding loading and unloading material adopts the gas-up shaft loading and unloading material, pneumatic locking, pneumatic lifting of the material roll, convenient loading an🍬d unloading, and high efficiency.

8.The unwinding EPC correction device is e🍸quipped with a CCD image sensor to accur🔴ately control the end face accuracy.

9. The slitting adopts the straight knife slitting deܫvice, the end face is neat, and the side scrap is sent by wind. (Paper needs 𒈔to purchase round knife slitting device)

10. The whole machine is driven by synchronous b𒐪elt and synchronous wheel, and pneumatically operated by locking and locking.

11. Traction guide roller: ꦐstatic balance aluminum alloy guid🌸e roller, surface hardening treatment

12. The system has the functions of starting buffering, parking anti-loo🐷se, metering length, constant speed, and coil diameter calcul🐻ation.

13. The system has a complete integrated design of machine, electricity and gas, and adopts complete safety prote🐓ction measures.